Acid Leaching - Copper Ore Treatment Method

23-05-2017· COPPER LEACHING CHARGING THE TANKS COPPER PRECIPITATION ACID SUPPLY PRODUCTION OF SULPHURIC ACID The

ACIDIC LEACHING OF COPPER AND TIN FROM USED CONSUMER

ACIDIC LEACHING OF COPPER AND TIN FROM USED CONSUMER EQUIPMENT D. Oraca,*, T. Havlika, A. Maulb, M. Berwangerb a Technical University of Kosice, Faculty of Metallurgy, Department of Non-Ferrous Metals and Waste Treatment, Kosice, Slovakia b RWTH Aachen University, Department of Processing and Recycling, Aachen, Germany (Received 03

Copper sulfides leaching assisted by acidic seawater-based,

Industrial cases of copper sulfide leaching using seawater or saline water 3. Pivotal cation/anions of acidic seawater-based media (ASM) and its potential effect 3.1. Ferric/ferrous ions The ferric, ferrous ions continuously regenerated in bio/chemical leaching of copper sulfides ( Hansford and Vargas, 1999, Haaningnielsen et al., 2005 ).

Acid Leachability Copper Species - 911 Metallurgist

methods employing sulfuric acid leaching. Several of these methods or variations of these methods are routinely used for oxide or acid soluble copper determinations at commercial laboratories in the western United States. Information regarding the dissolution behavior of a number of common copper

Leaching of copper oxide with different acid solutions,

15-10-2009· Leaching experiments were carried out in a water bath with 0.5 M acid concentration at temperatures ranging from 40 to 80 °C in steps of 20 °C and with agitation speed of 400 rpm. At temperature lower than 40 °C and l/ s < 40 ml/g, no dissolution of copper was observed.

Copper sulfides leaching assisted by acidic seawater-based,

The acidic KI media decreased the reaction activity energy from 81.4 to 33.8 kJ/mol, thus it resulted that the ferric ions regenerated and the peak copper leaching rate improved by 47% after adding 0.5 g/L KI solution.

Study of Copper Leaching from Mining Waste in Acidic Media,

24-08-2020· The material evaluated for the extraction of Copper by leaching in acidic solutions comes directly from waste dumps in the mining district of Linares, Jaén. The mining activity of Linares was mainly focused on the extraction of Lead and in a smaller proportion the Silver from the galena argentiferous mineral present in the area.

Copper Leaching Method - Metallurgist & Mineral Processing,

19-04-2019· Copper Leaching Practices. For centuries small amounts of copper have been recovered from acid mine-drainage waters. In recent years, the expansion of copper-bearing waste dump leaching for copper recovery has established a technological basis that is rapidly converting the art of copper leaching into a science.

Leaching behavior of copper from waste printed circuit,

01-02-2014· In this work, a Brønsted acidic ionic liquid, 1-butyl-3-methyl-imidazolium hydrogen sulfate ([bmim]HSO 4), was used to leach copper from waste printed circuit boards (WPCBs, mounted with electronic components) for the first time, and the leaching behavior of copper was discussed in detail.The results showed that after the pre-treatment, the metal distributions

Acid-leaching - Big Chemical Encyclopedia

Acid-leaching Nickel and Cobalt. Often present with copper in sulfuric acid leach Hquors are nickel [7440-02-0] and cobalt [7440-48-4]. Extraction using an organophosphoric acid such as D2EHPA at a moderate (3 to 4) pH can readily take out the nickel and cobalt together, leaving the copper in the aqueous phase, but the cobalt—nickel separation is more difficult (274).

Leaching Oxidized Copper Ores: Effect Of Strength Of Acid,

LEACHING OXIDIZED COPPER ORES; EFFECT OF STRENGTH OF ACID IN LEACHING SOLVENT 1 By John D. SuIlivan 2 and G. L. Oldri~ht3 INTRODUCTION In leaching oopper ores knowledge of the rate of dissolut!on of the copper mine rals an of t he impurities i s des irable. With knowledge of these two factors and data as to what

Optimization of sulfuric acid leaching of roasted,

26-08-2020· Tsogtkhankhai D, Mamyachenkov SV, Anisimova OS, Naboichenko SS (2011) Thermodynamics of reactions during nitric acid leaching of minerals of a copper concentrate. Russ J Non Ferrous Met 52:135–139. Google Scholar 6. Akçil A (2002) A preliminary research of acid pressure leaching of pyritic copper ore in Küre copper mine Turkey.

Selective Separation and Recovery of Tellurium from Copper,

24-11-2021· The recovery of tellurium from copper anode slime using acidic leaching followed by precipitation by both cuprous ion and cementation with copper metal and tellurium electrowinning was investigated. According to the results of the leaching experiments, the following conclusions were made: 1.

A STUDY OF LEACHING OF COPPER OXIDE ORE BY SULPHURIC ACID

sulphuric acid solution was used and 5 g of the ground copper oxide ore with a solid to liquid. ratio of 13%. Leaching parameters such as leaching time from 0.25 – 4 h, pH range 0.5 – 4,

Acidic leaching of potentially toxic metals cadmium,

A column leaching study, coupled with acid deposition simulation, was conducted to investigate the leaching of potentially toxic metals (PTM) from zinc smelting slag materials (SSM) after being incubated in an acid Alfisol for 120 days at room temperature.

Study of Copper Leaching from Mining Waste in Acidic Media,

24-08-2020· The material evaluated for the extraction of Copper by leaching in acidic solutions comes directly from waste dumps in the mining district of Linares, Jaén. The mining activity of Linares was mainly focused on the extraction of Lead and in a smaller proportion the Silver from the galena argentiferous mineral present in the area.

acidic reagent for copper leaching | Prominer (Shanghai,

Get Pricecopper leaching acid. Sulfamic acid SA , which possesses a zwitterionic structure, was applied as a leaching reagent for the first time for extracting copper from copper oxide ore. The effects of reaction time, temperature, particle size, reagent concentration, and stirring speed on this leaching were studied.

Acid-leaching - Big Chemical Encyclopedia

Acid-leaching Nickel and Cobalt. Often present with copper in sulfuric acid leach Hquors are nickel [7440-02-0] and cobalt [7440-48-4]. Extraction using an organophosphoric acid such as D2EHPA at a moderate (3 to 4) pH can readily take out the nickel and cobalt together, leaving the copper in the aqueous phase, but the cobalt—nickel separation is more difficult (274).

Selective Copper Recovery by Acid Leaching from Printed,

extract copper; for example, inorganic acids like HCl, HClO4, HNO3, and H2SO4, organic acids like citric acid and acetic acid, and spent acidic PCBs etching solutions [5–9]. Acid leaching is a simple process that extracts target metals from the sludge sample in

Selective Copper Recovery by Acid Leaching from Printed,

Two-stage leaching and evaporation were applied to extract and purify copper from copper-contaminated sludge: (i) in the first stage, 2.0 N sulfuric acid could leach out 95.2% Cu and other impurities (Fe, Al, and Pb); (ii) in the second stage, an ammonia solution was used to stabilize Cu by forming an amine complex in solution, while other impurities were precipitated as

Acidity as a factor in leaching of copper, chromium and,

ACIDITY AS A FACTOR IN LEACHING OF COPPER, CHROMIUM AND ARSENIC FROM CCA-TREATED DIMENSION LUMBER JOHN E. WARNER* Department of Environmental Biology, University of Guelph, Guelph, Ontario Canada N1G 2W1 KEITH R. SOLOMON Canadian Centre for Toxicology, Guelph, Ontario, Canada NlG 1Y3

Behaviour of zinc during the process of leaching copper,

In addition, the zinc leaching rate by [BSO 3 HMIm]OTf was almost the same as [BSO 3 HPy]OTf. Moreover, the acidic IL with CF 3 SO 3 − was less efficient than the acidic IL with HSO 4 −. Although zinc could restrain the leaching of copper because of the substitution reaction between metallic zinc and Cu 2+, the two show

Metals Recovery: Study of the Kinetic Aspects of Copper,

Kinetic Aspects of Copper Acidic Leaching Waste Printed Circuit Boards from Discarded Mobile Phones 226 Five representative samples (1g each) taken from treated WPCBs (d ≤ 1.25 mm) were subjected to atomic absorption spectroscopy (AAS) (Varian Spectrometer AA 20+) analysis to determine the concentrations of the

Acidic leaching of potentially toxic metals cadmium,

A column leaching study, coupled with acid deposition simulation, was conducted to investigate the leaching of potentially toxic metals (PTM) from zinc smelting slag materials (SSM) after being incubated in an acid Alfisol for 120 days at room temperature.

Leaching of Copper Sulphides - SAIMM

leaching step and that produced in the extraction of copper from the pregnant leach solution (PLS) is available for use in a copper heap leaching unit process. In this way, an acid credit to the operating cost is derived (Dreisinger, 2006). Secondly, it is worth noting that the POX residue can be leached in